Optimaler ph wert aquarium

In größeren Aquarien ist der Einsatz von Torf sinnvoller.

PH-Wert erhöhen

Zu niedrige ph-Werte sind deutlich seltener als zu hohe. These natural additions release tannins that help lower pH gradually, creating a more natural habitat.

  • pH-Specific Additives: Use commercial pH adjusters designed for aquariums to safely raise or lower pH.

    Um eine Gefährdung der Fische zu vermeiden, sollte maximal 20 mg/l C02 zugeführt werden.

    Erlenzäpfchen

    Die in Erlenzapfen enthaltenen Huminsäuren können den pH-Wert im Aquarium geringfügig senken. Ein solcher pH-Bereich fördert die Kalzifizierung und das Wachstum der Korallen.

    Durch die Einstellung dieser idealen pH-Werte kannst du sicherstellen, dass dein Aquarium ein gesundes und unterstützendes Umfeld für alle Bewohner bietet.

    They offer general readings but lack precision compared to electronic methods.

  • Electronic pH Meters: These are more accurate, using a probe submerged in water for a precise reading. Einige afrikanische Buntbarsche und europäische Zierfischarten benötigen hingegen eher leicht alkalisches Wasser. Regelmäßige Messungen und Anpassungen sind entscheidend, um das Gleichgewicht in deinem Aquarium aufrechtzuerhalten.

  • Säuregehalt im Aquarium

    Neu beim Thema Wasserwerte?

    Erlenzäpfchen werden einfach in das Wasser gelegt. Ein Wert von 0,1–1 mg/l ist für bepflanzte Aquarien ideal. Je nach Dosierung kann der pH-Wert auf diese Weise auf bis zu 8,5 erhöht werden.

    JBL ph-Plus - Erhöht den pH-Wert in Süß- und Meerwasser Aquarien

    9,79 €

    Zuletzt aktualisiert am: 13.12.2025

    Quellen

    flowgrow.de
    Afrikanische Cichliden, die in den pH-armen Seen Afrikas beheimatet sind, benötigen einen pH-Wert zwischen 7,8 und 8,6 (aquaristik-lexikon.de).

    Für Pflanzen und Wirbellose, wie Garnelen, spielt der pH-Wert ebenfalls eine wichtige Rolle.

    Wie schon erwähnt, geht die Senkung der CO2-Konzentration mit einer Erhöhung des pH-Werts einher. The pH level directly influences fish’s metabolism, breathing, and immune responses.

    Different species need specific pH ranges, so it’s essential to match the water conditions to your fish’s natural habitat.

    Understanding Water Chemistry: pH, KH, and GH

    Water chemistry in aquariums goes beyond pH.

    Two other key factors are KH (carbonate hardness) and GH (general hardness).

    Je härter das Wasser, desto besser lässt sich der pH-Wert durch diese Weise erhöhen.

    Um eine starke Oberflächenbewegung zu erreichen, sollte der Ausströmer des Filters knapp unter der Wasseroberfläche platziert werden. Hohe Nitritwerte deuten auf ein Problem mit der biologischen Filterung hin.

     

    Nitrat (NO3)

    Nitrat ist das Endprodukt des Stickstoffzyklus und weniger giftig.

    Hier sind einige ideale pH-Werte für verschiedene Aquarienbewohner:

    Für Süßwasserfische kann der ideale pH-Wert variieren, abhängig von ihrer natürlichen Umgebung. Dieser Wert misst, ob das Wasser alkalisch, neutral oder sauer ist, und beeinflusst die Fähigkeit der Fische und Pflanzen, Nährstoffe aufzunehmen. KH stabilizes pH by preventing rapid changes, while GH contributes to water hardness.

    Both help maintain an environment that suits various fish species.

    Factors Influencing Water Parameters

    Several factors can change aquarium pH and other water parameters:

    Keeping an eye on these elements helps you maintain a stable pH and a healthy habitat for your fish.

    Recommended pH Levels for Freshwater Aquariums

    Most freshwater fish thrive within a pH range of 6.5 to 8.0.

    Wie man das Wasser mithilfe von Torf ansäuert, erfährst du hier.

    Osmoseanlage

    Osmosewasser ist sehr weiches und reines Wasser. Die KH kann durch Zugabe von Natriumbicarbonat erhöht oder durch Osmosewasser gesenkt werden.

     

    Ammoniak/Ammonium (NH3/NH4)

    Ammoniak entsteht durch den Abbau von Futterresten und Ausscheidungen und ist hochgiftig.

    Typische Werte liegen bei 6–16 °dH, je nach Art.

    Wie messe ich sie?
    Tropfentests für GH und KH sind weit verbreitet und liefern präzise Ergebnisse.

     

     

    Karbonathärte (KH)

    Die Karbonathärte (KH), auch als „aquarium karbonathärte“ bekannt, misst die Pufferkapazität des Wassers und stabilisiert den pH-Wert.

    Always follow the manufacturer’s dosage instructions to prevent over-adjustment.

    During adjustments, monitor pH regularly with test kits or meters. However, certain species, like African cichlids or specific shrimp, may need a more precise pH level.

    Researching the ideal pH for each species helps you create an environment where your fish can thrive.

    Common Fish Species and Ideal pH Ranges:

    Fish SpeciesIdeal pH Range
    Guppies7.0 – 8.0
    Neon Tetras4.0 – 7.5
    Goldfish6.5 – 7.5
    African Cichlids7.4 – 8.0

    Matching pH to your fish’s natural habitat supports their health and reduces stress-related issues.

    Testing and Maintaining pH Levels in Freshwater Tanks

    Two primary tools help you test aquarium pH:

    Reading pH Results and Detecting Trends

    When you test pH, check if the reading aligns with the optimal range for your fish (typically 6.5 to 8.0). Hier eine kurze Einführung

    Der pH-Wert gibt den Säuregehalt einer Flüssigkeit an.

    Er reicht von 0 (sehr sauer) bis 14 (sehr basisch), wobei 7 neutral ist. In einem eingefahrenen Aquarium sollte Nitrit nicht nachweisbar sein (< 0,1 mg/l). Beispielsweise bevorzugen Diskusfische einen pH-Wert zwischen 6,0 und 6,5, während Guppys sich in leicht alkalischem Wasser mit einem pH-Wert von 7,0 bis 7,5 am wohlsten fühlen (Aquasabi).

    Für niedrige pH-Werte muss die Karbonathärte reduziert werden und/oder der CO2-Gehalt erhöht werden. Unser Leitungswasser hat normalerweise einen neutralen pH-Wert von ca. Ein optimaler KH-Wert im Aquarium liegt zwischen 5–16 °dKH für Süßwasseraquarien, da er plötzliche pH-Schwankungen (Säuresturz) verhindert und CO2 für Pflanzen bereitstellt.

    Marcin actively collaborates with professional aquascapers and lighting manufacturers to provide reliable, research-backed information. Die Haltung von Garnelen erfordert oft noch speziellere Bedingungen, wobei bestimmte Sulawesi-Arten Wasser mit einem sehr speziellen pH-Wert von etwa 7,5 bis 8,5 bevorzugen (Garnelen Onlineshop).

    In Meerwasseraquarien ist der pH-Wert ebenso entscheidend.

    If the pH is outside this range, you can make adjustments using natural methods or specific additives.

    Over time, monitoring trends in pH levels helps you spot any fluctuations that might indicate a problem. Ein leicht saurer Wert von 6,5 bis 6,8 unterstützt die Nährstoffaufnahme der Pflanzen, was besonders für Aquascaping-Projekte von Vorteil ist (ZooRoyal).

    Using the same brand consistently ensures accurate readings, as different brands may yield slightly varied results.

    Comparison of pH Adjustment Methods

    Adjustment MethodProsCons
    Natural MethodsChemical-free, gradual change, natural feelRequires patience; results may vary
    pH-Specific AdditivesPrecise, quick resultsRelies on commercial products, risk of overuse

    Conclusion

    Maintaining the proper pH balance is crucial for the health and well-being of the fish and other aquatic life in a freshwater aquarium.

    The ideal pH range for most freshwater fish is between 6.5 to 8.0, but always research the specific pH requirements of the fish species you plan to keep.

    Regular testing, monitoring, and adjustment of the pH levels are necessary to create a stable and balanced aquarium environment.

    To do it right, follow few simple steps:

    By following these practices, you can maintain a healthy, stable pH for a thriving aquarium environment.

    FAQ

    What should the pH be in a freshwater aquarium?

    The ideal pH range for most freshwater fish is between 6.5 to 8.0.

    Why is pH important in a freshwater aquarium?

    pH is important because it can impact the health and well-being of the aquatic life in the aquarium.

    How do I test the pH level in my aquarium?

    You can test the pH level using pH test strips, drop tests, or electronic pH meters.

    Why is it important to monitor and maintain the pH in a freshwater aquarium?

    Regular monitoring and maintenance of the pH levels are necessary to create a stable and balanced environment for the fish.

    It is generally recommended to aim for a pH between 6.5 to 8.0 for a diverse community tank.

    How can I adjust the pH in my freshwater aquarium?

    You can adjust the pH by using natural methods such as adding driftwood or using pH-specific additives.

    What are some safe practices for adjusting pH in a freshwater aquarium?

    It is important to make adjustments gradually and avoid sudden changes in pH to prevent stress to the fish.

    Can the surrounding ecosystem and decorations affect the pH in a freshwater aquarium?

    Surrounding ecosystem and artificial factors like decorations can influence the pH level in the aquarium.

    How often should I test the pH in my freshwater aquarium?

    Regular testing once a week or two is recommended, especially during initial setup, and as part of routine maintenance.

    Where can I find information on the specific pH requirements for the fish species I plan to keep?

    You can find information on specific pH requirements by researching the particular fish species or consulting with experts at your local aquarium store or online forums.

    Source Links

    Marcin is the founder of HealthyHomeAquarium.com, and has been passionate about aquatics for over 25 years.

    He specializes in aquarium lighting, CO₂ systems, and plant nutrition, having tested and reviewed numerous lighting systems, from LEDs to T5 fluorescents and metal halides.